Sensi SupportTouch Wi-Fi ThermostatFeatures › Temperature Offset

Features

Temperature Offset

Temperature Offset is a feature that lets you adjust the room temperature reading +/- 5°F. This helps if your Sensi thermostat is in a slightly warm or cold spot, or if the room temperature does not match your old thermostat.

To update the room temperature reading using Temperature Offset:

  1. Open the Sensi app and tap the correct thermostat from the dashboard screen
  2. Select Settings and then Advanced Settings
  3. Go to Temperature Offset and adjust as needed so it reads higher or lower to match your preference

Your Sensi thermostat will use the new number as the actual temperature of the room.

If the offset adjustment (+/- 5°F) does not get you to the room temperature you like, it may be necessary to perform a load calculation on the building and HVAC equipment to confirm the HVAC equipment is sized correctly. In nearly all cases where a digital thermostat is not reading accurately, it is because of a poor thermostat location or an improperly sized heating/cooling HVAC equipment.

Reach out to us

Our customer support is available 7 days a week.

Get support