Sensi SupportMultiple Thermostat ManagerBefore you buy › How can I be sure Sensi Multiple Thermostat Manager is compatible with my system(s)?

Before you buy

How can I be sure Sensi Multiple Thermostat Manager is compatible with my system(s)?

Sensi Multiple Thermostat Manager works with all Sensi thermostat models. Sensi thermostats work in many building/facility settings and are compatible with most 24VAC conventional heating and cooling, heat-only, cool-only, and heat pump/geothermal systems.

Whether your building HVAC units are big or small, on the roof or on the ground, the quickest way to confirm if Sensi thermostats will work for your system is to use our wire picker tool. Locate the thermostat(s) that control your building’s heating and cooling. Remove the thermostat cover from the baseplate. Use the Sensi wire picker tool to enter the terminals that have wires attached to them. You will quickly find out if your system is compatible.

Sensi thermostats are NOT compatible with the following types of building/facility systems:

  • Line voltage (high voltage)
  • Millivolt systems (very low voltage)
  • Communicating systems (BACnet, Modbus, LonWorks)
  • VAV systems
  • Evaporative coolers
  • Heat Recovery Ventilator (HRV)
  • Energy Recovery Ventilator (ERV)
  • Economizer
  • Dry Contacts
  • Humidification/Dehumidification systems*
  • Remote Sensors*
  • PTAC**

*Sensi thermostats may work with your system, but do not control humidifiers or dehumidifiers, and do not work with remote sensors.

**May be compatible if the system supports remote thermostats. Refer to your manufacturer manual.

Reach out to us

Our customer support is available 7 days a week.

Get support